Smiths Graseby 3200, Technical & Service Manual

Page: 27 / 117

Smiths Medical International Ltd.
Issue 5 (August 2004)
3200 Service Manual 2 — 5
Configuration mode
This parameter allows a selection of in-line pressure sensing options.
If YES is chosen, the pump senses the presence of a syringe extension set and shows
the in-line pressure on the display.
If the extension set is not being used, choosing YES causes the following prompt to
appear when the START button is pressed...
Press START to run without disposable
This display serves as a warning that the extension set is not being used. Pressing the
START button a second time runs the pump without the extension set.
Choosing NO also allows the pump to run without the extension set.
Choice: YES or NO
Use pressure 16.
transducer
This parameter allows the pressure bar graph to be displayed when YES is chosen.
If NO is chosen, the display will be similar to the following:
10 mmHg (75)
Choice: YES or NO
Display 17.
pressure
bar graph
If YES is chosen this parameter allows the PURGE button to infuse a bolus when the
pump is running.
Choice: YES or NO
Allow bolus 18.
while running
If YES is chosen, this parameter allows the infusion rate to be changed during the actual
infusion.
The infusion can thus be titrated to the physiological response of the patient.
Choice: YES or NO
Allow rate 19.
change while
running
In the Intermittent mode, this parameter allows a start delay between 0 and 24 hours to
be chosen before the intermittent regime is started.
Choice: YES or NO
Intermittent 20.
mode start
delay
This parameter allows a choice of Baud rates when the pump is connected to a PC or a
printer.
Choice: 9600
4800
2400
1200
600
300
RS232 Baud 21.
rate
(contd.)