Smiths Graseby 3200, Technical & Service Manual

Page: 28 / 117

Smiths Medical International Ltd.
3200 Service Manual Issue 5 (August 2004)
2 — 6
Configuration mode
This parameter allows a computer to interrogate both the information stored in the pump
and the pumps status.
Choice: MONITOR this choice allows an external computer or a printer to
ONLY.. be connected to the pump.
NONE... this choice ensures that a computer cannot be used to
monitor the pump.
Contact Smiths Medical (Customer Support) for information on setting up a computer
link.
Commun- 22.
ication mode
The identification (ID) of the pump appears on the initial power up display. It also
appears on the printout.
This parameter allows an ID of up to 12 alphanumeric characters to be chosen.
To change the pump’s ID use the START ,
▲
or
▼
and ENTER buttons, and press STOP
when finished.
A typical ID display is shown below:
The pump ID accepts 12 characters exactly. A blank space is not provided.
Pump ID 23.
This parameter allows the sound of the key beep to be adjusted so that it is at an
appropriate level for the existing environment.
Choice: 1 to 10.
1 is quiet.
10 is loud.
As the choice is altered from 1 to 10, the sound level increases.
Set key 24.
beep
volume
This parameter allows any one of five choices to be made for the in-line pressure
sensor display, as shown below:
Choice: mmHg.
mbar.
cmH2O.
psi.
kPa.
Pressure units 25.
Press the STOP button to exit from the configuration mode.
End of menu 26.
GRASEBY-3200