HGM8110DC GENSET CONTROLLER USER MANUAL
HGM8110DC Genset Controller 2018-12-27 Version 1.1 Page 56 of 60
14.12 MTU ADEC(SMART MODULE)
It is suitable for MTU engine with ADEC (ECU8) and SMART module.
Table 35 - ADEC(X1 Connector)
Terminals of controller
ADEC (X1port)
Remark
Fuel relay output
X1 10
X1 Terminal 9 Connected to negative of
battery
Start relay output
X1 34
X1 Terminal 33 Connected to negative of
battery
Table 36 - ADEC(X4 Connector)
Terminals of controller
SMART (X4 port)
Remark
CAN GND
X4 3
CAN communication shielding line (connect
to controller‘s this terminal only).
CAN(H)
X4 1
Using impedance 120Ω connecting line.
CAN(L)
X4 2
Using impedance 120Ω connecting line.
Engine type: mtu-ADEC
14.13 MTU ADEC (SAM MODULE)
It is suitable for MTU engine with ADEC (ECU7) and SAM module.
Table 37 - ADEC(X1 Connector)
Terminals of controller
ADEC (X1port)
Remark
Fuel relay output
X1 43
X1 Terminal 28 Connected to negative of
battery.
Start relay output
X1 37
X1 Terminal 22 Connected to negative of
battery.
Table 38 - SAM(X23 Connector)
Terminals of controller
SAM (X23 port)
Remark
CAN GND
X23 3
CAN communication shielding line (connect
with controller‘s this terminal only).
CAN(H)
X23 2
Using impedance 120Ω connecting line.
CAN(L)
X23 1
Using impedance 120Ω connecting line.
Engine type: Common J1939
14.14 PERKINS
It is suitable for ADEM3/ ADEM4 engine control module. Engine type is 2306, 2506, 1106, and 2806.
Table 39 - Connector
Terminals of controller
Connector
Remark
Fuel relay output
1,10,15,33,34
Start relay output
-
Connect to starter coil directly.
CAN GND
-
CAN communication shielding line (connect
with controller‘s terminal only).
CAN(H)
31
Using impedance 120Ω connecting line.
CAN(L)
32
Using impedance 120Ω connecting line.
Engine type: Perkins
