HGM8110DC GENSET CONTROLLER USER MANUAL
HGM8110DC Genset Controller 2018-12-27 Version 1.1 Page 10 of 60
4
SPECIFICATION OPERATION
Table 4 - Technical Parameters
Items
Contents
Operating Voltage
DC8.0V to DC35.0V, Continuous Power Supply.
Power Consumption
<4W (standby
≤2W)
Alternator Input Range
3Phase 4Wire
3Phase 3Wire
Single Phase 2Wire
2Phase 3Wire
AC15V-AC 360V (ph-N)
AC30V - AC620V (ph-ph)
AC15V - AC360V (ph-N)
AC15V - AC360V (ph-N)
DC Generator Voltage Input
DC 0V - 10V
Alternator Frequency
50 /60Hz, 400Hz
Speed sensor voltage
1.0V to 24.0V (RMS)
Speed sensor Frequency
10,000 Hz (max.)
Start Relay Output
16 A DC28V at supply output
Fuel Relay Output
16 A DC28V at supply output
Programmable Relay Output (1)
7 A DC28V at supply output
Programmable Relay Output (2)
7 A DC28V at supply output
Programmable Relay Output (3)
7A DC28V at supply output
Programmable Relay Output (4)
7A AC250V voltage free output
Programmable Relay Output (5)
8 A AC250V voltage free output
Programmable Relay Output (6)
8 A AC250V voltage free output
Case Dimension
242mm x186mm x53mm
Panel Cutout
214mm x160mm
CT Secondary Current
5A rated
Working Conditions
Temperature: (-40~+70)°C; Relative Humidity: (20~93)%RH
Storage Condition
Temperature: (-40~+70)°C
Protection Level
IP65: when rubber seal installed between the controller enclosure
and panel fascia.
Insulating Intensity
Apply AC2.2kV between high volt terminal and low volt terminal;
The leakage current is not more than 3mA within 1min.
Net Weight
0.85kg
