HGM8110DC GENSET CONTROLLER USER MANUAL
HGM8110DC Genset Controller 2018-12-27 Version 1.1 Page 12 of 60
Icon
Key
Description
Up/Increase
1) Screen scroll; 2) Up cursor and increase value in
setting menu.
Down/Decrease
1) Screen scroll; 2) Down cursor and decrease value in
setting menu.
Left
1. Screen scroll;
2. Left move cursor in setting menu.
Right
1. Screen scroll;
2. Right move cursor in setting menu.
Confirm
In settings menu confirms the set value.
Exit
1. Returns to the previous screen;
2. In settings menu returns to the upper level menu.
NOTE
: In manual mode, pressing
and
simultaneously will force generator to crank. Successful
start will not be judged according to crank disconnect conditions, operator will have to crank the starter motor manually;
when operator decides that the engine has fired, he/she should release the button and start output will be deactivated,
safety on delay will start.
WARNING:
Default password is
―00318‖, user can change it in case of others change the advanced parameters setting.
Please clearly remember the password after changing.
If you forget it, please contact SmartGen services and send PD information in the controller page of ―
ABOUT
‖ to us.
5.3
LCD DISPLAY
5.3.1. MAIN DISPLAY
Main screen show pages; use
to scroll the pages and
to scroll the screen.
★
Main Screen
, including as below,
Partial status display;
AC Gen: voltage, frequency,
AC Load: current, active power, reactive power, power factor;
DC Gen: voltage, current, power, total energy;
Engine: speed, temperature, oil pressure
NOTE: it will circulatory scroll pages if no action after enter the main display.
★
Status
, including as below,
Status of genset, and ATS
★
Engine
, including as below,
Speed, temperature of engine, engine oil pressure, fuel level, Configure Sensor 1, Configure Sensor 2,
battery voltage, charger voltage, accumulated run time, accumulated start times, user A and user B
accumulated start times.
NOTE: If connected with J1939 engine via CANBUS port, this page also includes: coolant pressure, coolant
level, fuel temperature, fuel pressure, inlet temperature, exhaust temperature, turbo pressure, fuel
