CHAPTER 4
-
CONFIGURING YOUR ROOM SYSTEM’S SOFTWARE
29
smarttech.com/kb/170450
6. In Control Panel, configure the displays as follows:
IMPORTANT
o
Align the top of all displays as shown in the above diagram.
o
Set the console as the main display by clicking its thumbnail and then selecting
Make this my main display.
o
Position the console to the right of the interactive flat panels as shown in the above
diagram.
o
You are unable to change these settings later, so ensure you configure the displays
correctly.
TIP
To determine which display is which, press Identify. Each display’s number appears briefly
on the display.
7. In Control Panel, click Apply and then click OK.
8. In the dialog box, click OK.
The Lync appliance restarts.
9. Type the room system administrator account’s password, and then press ENTER.
The Microsoft end user license agreement appears.
10. Read the Microsoft end user license agreement, and then click Accept.
The Lync Admin Console appears.
11. Continue to the next procedure.
