Smart Technologies AM70-L Setup And Maintenance Manual Download

Page: 103 / 128

APPENDIX B

USING THE INTERACTIVE FLAT PANEL ON-SCREEN DISPLAY MENU

smarttech.com/kb/170450

Option

Values

Function

Notes (if any)

MONITOR INFO

MODEL NAME

[N/A]

Shows the interactive flat panel’s
model number

This option only provides
information. You’re unable to
modify it.

SERIAL NUMBER

[N/A]

Shows the interactive flat panel’s
serial number

This option only provides
information. You’re unable to
modify it.

OSD TRANSPARENCY

TYPE1

TYPE2

OFF

Sets the on-screen display menu
transparency

OSD RESET

[N/A]

Resets all options in the

OSD menu

to their default values

SETUP

POWER SAVE

OFF

Enables or disables Power Save
mode

Don’t change this option from its
default value.

STANDBY MODE

STANDBY

ECO STANDBY

Sets the Standby mode to reduce
power consumption

Don’t change this option from its
default value.

DDC CI

ENABLE

DISABLE

Enables or disables two-way
communication and control of the
interactive flat panel

This option isn’t applicable to the
SMART Room System. Don’t
change it from its default value.

SCAN MODE

UNDER SCAN

OVER SCAN

Sets the scanning mode

This option isn’t applicable to the
SMART Room System. Don’t
change it from its default value.

FBC CONTROL

ENABLE

DISABLE

Enables or disables the front
control panel

Don’t change this option from its
default value.

MONITOR ID

1–100

Sets the interactive flat panel’s ID

This option isn’t applicable to the
SMART Room System. Don’t
change it from its default value.

PROXIMITY CONTROL

PROXIMITY

ENABLE

DISABLE

Enables or disables presence
detection

You can modify this option only if
you select STANDBY in
STANDBY MODE.

If you change this option in
SMART Settings (see page 84), the
change appears in the on-screen
display menu. However, if you
change this option in the on-screen
display menu, the change doesn’t
appear in SMART Settings.

Summary of Contents for AM70-L

































































































































Search results

Summary of Contents for AM70-L

Reviews:

Related manuals for AM70-L

Brands by name

Popular brands

Smart Technologies AM70-L, Setup And Maintenance Manual

Search results

Summary of Contents for AM70-L

Reviews:

Related manuals for AM70-L

Brands by name

Popular brands