SMART Board 8070i, User Manual

Page: 72 / 96

C
C A U T I O N
l
Do not use compressed air to clean the camera windows or borders.
l
Use only water to dampen the cloth. Do not use chemicals or cleaning agents.
g
To clean the camera windows and reflective tape
1. Lightly moisten a clean lint-free cloth with water.
2. Using the cloth, gently wipe the camera windows in the top corners and the reflective tape
along the top of your interactive display screen.
3. Gently wipe the reflective tape along the sides of your interactive display screen.
4. Gently wipe the camera windows in the bottom corners and the reflective strip across the
bottom of your interactive display screen.
5. Dry the reflective tape with a clean lint-free cloth.
Maintaining ventilation
Your interactive display requires ventilation to enable the fans to cool the interactive display.
Dust buildup in the ventilation holes compromises cooling and leads to product failure.
C
C A U T I O N
Avoid setting up or using your interactive display in an area with excessive levels of dust,
humidity or smoke.
l
Clean accessible ventilation holes with a dry cloth monthly.
l
Use a vacuum cleaner with a narrow hose end fitting to clear the back ventilation holes
annually. You might have to remove the interactive display from your wall. For more
information on removing your interactive display see page 65.
Preventing condensation
Your interactive display screen contains layers of glass that might collect condensation,
especially in the following conditions:
l
Temperature extremes with high humidity
l
Rapid changes in humidity, which might occur when you operate the product near water,
such as a sink, pool, kettle or air conditioner ventilator
l
Direct exposure to sunlight
C H A P T E R 7
Maintaining your interactive display
64