SMART Board 8070i, User Manual

Page: 70 / 96

6. Press the red target with the tip of a pen tray pen. Hold the tip at the center of the target
until the target turns green, and then lift the pen.
The target moves to the next location.
N
N O T E
You can re-calibrate a target by pressing the LEFT ARROW key on your keyboard, or
the Keyboard button or Right-click button on the pen tray.
7. Continue pressing targets until the calibration is complete.
A message appears stating that the calibration was successful, and then the orientation
screen appears.
8. Orient your interactive display.
Orienting your interactive display
When the location of your touch is misinterpreted (a pointer appears a distance from the actual
contact), orient your interactive display.
g
To orient the interactive display
1. Press the orientation button
on the color select module.
OR
Complete the calibration process (see page 61).
The orientation window opens.
2. Use an interactive display pen to press the red targets as they appear. Hold the tip of the
pen at the center of each target until the target turns green, and then lift the pen. When you
lift the pen, the target moves to the next orientation point.
I
I M P O R T A N T
Hold the pen perpendicular to the screen.
3. Continue until you’ve pressed all the targets.
The orientation window closes.
If this does not correct inaccurate touch control, calibrate your interactive display. For more
information, see page 61.
Replacing a pen nib
To prevent damage to your interactive display’s anti-glare coating, replace your pen nib if it
becomes worn. Four replacement pen nibs are included with your pen set, and you can purchase
additional replacements from your authorized SMART reseller.
C H A P T E R 7
Maintaining your interactive display
62