SMART Board 8070i, User Manual

Page: 19 / 96

Important mounting considerations for trained installers
Consider the following when mounting your interactive display on a wall:
l
Plan your workflow to include cabling because some cable attachment points might not be
accessible post-installation.
I
I M P O R T A N T
Speakers must be attached and speaker wires connected to your interactive display
before it is wall-mounted. For more information, see page 16.
l
To wall-mount your interactive display, you require a standard VESA 400 mm × 400 mm
mounting plate, not included.
l
Attach the included M12 eyebolts and washers to assist in mounting.
W
W A R N I N G
o
In order to aid in mounting or carrying, a lifting device must be used in conjunction
with the M12 attachable eyebolts. Do not attempt to mount or carry the display
using your own strength because your interactive display could fall and cause
personal injury.
o
Use VESA-approved mounting hardware. Remove the M12 eyebolts after
installation.
l
Inspect the installation location to ensure that it can support the weight of your interactive
display.
l
Use M8 screws to fasten the wall bracket. The length of the screws must be 14-15 mm
plus the thickness of the bracket and the washer. If using screws longer than 14-15 mm,
ensure sufficient depth.
l
Recommended fasten force is 1125-1375 N·cm.
C H A P T E R 2
Installing your interactive display
11