SMART Board 8070i, User Manual

Page: 27 / 96

Connecting to power and your room computer
Your room computer is the default computer for your interactive display. Connect this computer
to your interactive display with a VGA cable and a USB cable.
Room computer connection diagram
g
To connect your interactive display to power and your room computer
1. Connect the included VGA cable from your computer to the VGA connection on the bottom
terminal panel.
2. Connect the included USB cable from the USB 1 receptacle on the inside terminal panel of
the interactive display to a USB receptacle on the computer.
3. Connect the included power cable from the AC IN connector on the bottom terminal panel
to a power outlet.
4. Connect the power cable from your computer to a power outlet.
5. Turn on the main power switch on the bottom terminal panel, and then press the power
button on the front control panel.
6. Using the remote control or the input button
on the front control panel, set the
interactive display’s input source to VGA.
7. Turn on your computer.
C H A P T E R 3
Connecting computers and peripheral devices to your interactive display
19