SMART Board 8070i, User Manual

Page: 64 / 96

g
To connect a side laptop
1. Connect an HDMI cable from the laptop’s HDMI to your interactive display's side laptop
terminal panel.
2. Connect a USB cable from the laptop USB connector to your interactive display’s side
laptop terminal panel.
I
I M P O R T A N T
The USB type A receptacle is for USB devices only. Do not connect the laptop to this
receptacle.
3. Turn on the laptop.
4. Press the HDMI input button on the remote control twice.
OR
Press the input button on the front control panel to change the input source to HDMI2.
g
To return to using the room computer
1. Press the VGA button on the remote control.
OR
Press the input button on the front control panel to change the input source to VGA.
2. Disconnect the laptop from the interactive display if required.
Using a SMART GoWire auto-launch cable
Any computer connected to your interactive display requires SMART software. Typically you will
install this software on your room computer so that it is always ready for use (see page 25 for
more information).
C H A P T E R 6
Using guest laptops with your interactive display
56