SMA Sunny Island 4500 Installation & Operating Instructions Manual Download Page 114

Page: 114 / 232

Sunny Island 4500

Installation & Operating Instructions

BWRI45-13-EE0304

- 112 -

SMA Regelsysteme GmbH

8.4 Menu “PARGRD“ (3+4), Parameters Grid

This menu can only be selected after the installer password (level: 1) has been en-

tered.

Fig. 8.6:

Menu “PARGRD“ (3+4)

The Sunny Island is informed about the operating values of the connected AC grid

with the settings in the menu “PARGRD“ (3+4). These values are the voltage and

frequency which the Sunny Island, being the grid-forming device, has to make avail-

able. In addition these are limiting values. When these limits are exceeded the Sunny

Island in grid-tied operation detects this state as an error.

After changing the parameter “401_Phase Mode“ the Sunny Island

must be restarted (for example in the menu “FUNCT” (2+3), see

Chapter 7.3).

Summary of Contents for Sunny Island 4500









































































































































































































































Search results

Summary of Contents for Sunny Island 4500

Reviews:

Related manuals for Sunny Island 4500

Brands by name

Popular brands

SMA Sunny Island 4500, Installation & Operating Instructions Manual

Search results

Summary of Contents for Sunny Island 4500

Reviews:

Related manuals for Sunny Island 4500

Brands by name

Popular brands