SMA Sunny Island 4500 Installation & Operating Instructions Manual Download Page 144

Page: 144 / 232

Sunny Island 4500

Installation & Operating Instructions

BWRI45-13-EE0304

- 142 -

SMA Regelsysteme GmbH

10.1 Menu “ACKN“ (4-1), Error Confirmation

Fig. 10.3:

Menu “ACKN“ (4-1)

This menu always shows the last serious error that has occurred. The operator has to

confirm this error state by selecting the menu item “Acknowledge“. If there are more

than one of those error messages they have to be confirmed one after the other.

10.2 Menu “HISTOR“ (4-2), Overall Protocol

Fig. 10.4:

Menu “HISTOR“ (4-2)

This menu comprises a chronological list of all changes of operating states logged

by the Sunny Island (“events“), exceeded limiting values and errors (“errors“, “alerts“).

The date and time of occurrence are logged as well for each of these. A list of mes-

sages available is provided in Chapter 18.

Summary of Contents for Sunny Island 4500









































































































































































































































Search results

Summary of Contents for Sunny Island 4500

Reviews:

Related manuals for Sunny Island 4500

Brands by name

Popular brands

SMA Sunny Island 4500, Installation & Operating Instructions Manual

Search results

Summary of Contents for Sunny Island 4500

Reviews:

Related manuals for Sunny Island 4500

Brands by name

Popular brands