20/11/2020
67/88
E_MH_Installation_instructions_Skylux_Climax
ZSG
Finish
GUTTER GD2
For window profiles > 80 mm: screw GD2C into the central indication line using coated screws ZSG in plastic
profile Y16P. Once it is in the correct position, free the adhesive strip completely and push the GD2C against the
gutter. Make sure the GD2C profile does not exceed the thermal break of the window profile.
GLAZING
Do not forget to apply sealant to the end profiles on the plastic sheets on the gutter side.
POSTS
Check whether the posts are completely vertical
(level) and fasten each top and bottom section in the
U-brackets using coated ZSG screws. Pre-drill holes
with a 3 to 4 mm Ø to avoid damaging the coating.
Add the water outlet pipe and connect it to the
rainwater drain pipe. Install the PC cover clips to the
post.
33
145
GD2
GD2C
ZSG
Y16P
ZSG
click
