20/11/2020
61/88
E_MH_Installation_instructions_Skylux_Climax
Finish
FREESTANDING SIDE SUPPORTS WITH CLIPS
Finish using clips for plastic sheets or glass:
The glazing thickness and options are provided in the table on page 83.
Standard clips (for plastic sheets of glass with a thickness of 16. 25 or 32 mm):
CL16 for 16 mm thick sheets or glass. CL32 for 25 to 32 mm thick sheets or glass.
Push seal C8 or CY10 on both sides into the clips. Ensure that seal C8 does not continue up to the end of the
gutter side but to the end profile on the glazing. CL16 and CL32 are fastened with the clips to sheet support TP.
The clips are fastened manually using a rubber hammer and a plank. Ensure the clips are not dented.
Screw-in clips (for plastic sheets of glass with a thickness of 16.25 or 32 mm):
CLSB + CLSL for plastic sheets or glass with a thickness between 8 and 34 mm.
Push seal C8 or CY10 into the CLSB clips. Ensure that seal C8 does not continue up to the end of the gutter side
but to the end profile on the glazing.
ZD
TP(G)
CL16/CL32
Y16P
C8
C8
Y16P
C5
ZDC
ZD
TP(G)
CLSB
Y16P
C8
C8
Y16P
C5
ZDC
CLST
