20/11/2020
57/88
E_MH_Installation_instructions_Skylux_Climax
Glazing: glass sheets
Preparation
gutter
Glazing
GD1+G
GD2+G
Glass
5 - 45°
Always use laminated glazing in your conservatory roof according to the applicable standards. Consult your glass
supplier. Stick an L-shaped end profile (L432 or L632) on the crosscut side of the glass. Use silicone SG20 for this.
Assembly
Check the length of spacers A1/A2. The length of the spacers must match the distance between the supports.
Slide seal C5 into the groove and push support seal C31 into the cut-aways of spacers A1 or A2. The spacers fit
into the hinge profile between the supports. The glazing is, therefore, supported on four sides. Position the glazing
between the sheet supports with the end profile against the stop profiles on the gutter side. Ensure to leave 5 mm
clearance at each side.
Glazing connection
When the glazing (plastic sheets or glass) consists of multiple parts, the parts can be connected using glass
connection profiles GVB and GVT. Specific installation instructions are provided on pages 82 & 83
L432/L632
max.
28 mm
30
40
28 - 38 mm
40
30
L432
L432
60
30
L632
C31
C5
A1/A2
S1/S2
C11CX
MB
