E_MH_Installation_instructions_Skylux_Climax
20/11/2020
38/88
Finish
SIDE SUPPORTS
SEAL FINISH
Seal C2CX for plastic sheets or glass: The glazing thickness and options are provided on page 84.
Push seal C2CX into sheet support TP(G) or into raised profile Y25/Y32. Cut side finishing profile L16P obliquely
on the wall side in accordance with the roof pitch a. Measure the distance from the wall to the stop profile to
determine the length of profile L16P. Position profile L16P against the exterior against the support profile. Fasten
profile L16P every metre sideways against the support (with ZSG) or against the wall using screws if the structure is
to be freestanding or against a wall.
CLIP FINISH
Clips for plastic sheets or glass: The glazing thickness and options are provided on page 84.
CLSB + CLSL for plastic sheets or glass with a
thickness of 8 to 34 mm: Position seal C8 or CY10 on
one side into the clips.
CLL for plastic sheets or glass with a 16, 25 or 32 mm
thickness: Position seal C8 or CY10 on one side into
the clips.
TP(G)
C2CX
L16P
ZSG
5 mm
C2CX
Y25/Y32
TP(G)
L16P
C8
CLL
CLSL
C8
CLSB
Hilo 25/42
