Skanti TRP 9250, Technical Manual, Page: 76 / 289

The Transceiver Control Unit may be tabletop or bulkhead mounted. Fig. 2 and 3 shows different
possibilities to obtain the best possible viewing and operation position and fig.3 includes the use of
the optional bracket . Overall dimensions and a drilling plan for the necessary holes is also shown
in fig.s 2 and 3. If the mounting surface is not sufficiently plane then apply washers between the
Transceiver Control Unit and the surface.
1) Space for handset access min. 150
2) Space for cable entry and handset cable: min. 200
3) Space for cable entry: min 50
4) For tilted mounting: drill 4 holes Ø8 in bottom of cabinet
Dimensions are in mm
Tolerance: +/- 1 mm
Weight: 3.4 Kg
Doc.: 4-0-31441
fig.3
fig.2
Mounting options
MOUNTING THE UNITS INSTALLATION
TRP 9250 TECHNICAL MANUAL 3-5