Skanti TRP 9250, Technical Manual, Page: 69 / 289

View or change Security Code.
Once encoded the Security Code provides the equipment with a psychological
barrier against theft as the equipment is not operational before the correct code
is entered.
A "Security Code" sticker is supplied together with the transceiver. It must
preferably be placed on a visible spot near the equipment.
As the Security Code is assigned only to the currently used Control Unit, it is
necessary to store a Security Code in all CU’s where more than 1 is installed. A
different Security Code may be used for each Control Unit as a protectiaon gainst
unauthorized use.
For Security Code, numbers between "1" and "9999999" may be used providing
a total of 9999999 different numbers.Factory setting is "0" which means no entry
of Security Codeis required to operate the transceiver.
If the Security Code feature is desired, the following syntax must be used:
"Prog" "98" "Enter"
The Receiver Display shows the current Security Code. Key-in the wanted
Security Code and store it:
"Security Code" "STO"
The Security Code is now stored in the currently used CU and must be entered
every time the power supply is switched on:
"Security Code"
"Enter"
NOTE
• To disable the Security Code a "0" is stored meaning no Security Code.
• The Handset must be hooked on before the Supply is switched on and
the Security Code is entered.
• If a wrong Security Code is entered the equipment is not operational.
• If a wrong Security Code is entered by mistake, just press "Enter" and enter
the correct Security Code.
• Write down your Security Code and keep it in a non conspicuous place.
• If the Security Code is forgotten contact the local dealer.
• If the Security Code is used as a preventive measure against theft, it is
recommended to enable the Security Code only when the ship is in port and
disable the Security Code when the ship is at sea, giving quick radio-access
to all on board in case of an emergency situation.
OPERATION OPERATION RELATED ’PROG’ KEY OPERATIONS
2-54 TRP 9250 TECHNICAL MANUAL