Skanti TRP 9250, Technical Manual, Page: 222 / 289

SENDING A DIRECT-DIAL CALL, INFO
Direct-dial calls are used for direct telephone dialling of a land subscriber through an appropriate coast
station providing automatic connection with the public switched telephone network.
Note: Not all coast stations provide this service.
To recall a saved call press the short-dial number (0-9).
To repeat a call press the call button.
Alternatively the MMSI list number (0-99) may be entered if the coast station has been programmed
into the MMSI list. When Enter is pressed the programmed name of the coast station will be shown
next to the 9-digit MMSI number.
Alternatively the telephone list number (0-99) may be entered if the number has been programmed
into the telephone list. When Enter is pressed the programmed name of the coast station will be shown
next to the telephone number.
The name of the coast station or the country may be used instead of NATIONAL, please refer to page
2-64 PROGRAMMING DSC-FREQUENCY LIST for further information.
DSC OPERATION SENDING A DIRECT-DIAL CALL, INFO
6-30 TRP 9250 TECHNICAL MANUAL