Skanti TRP 9250, Technical Manual, Page: 133 / 289

PRIVACY
By enabling/disabling Privacy the received signal and information displayed in the TCU’s can be
controlled. This enables either normal use where the communication can be followed in another
room, or private conversation. When Privacy is disabled all key entries are reflected in all displays
and the received signal is led to all TCU’s. Enabled Privacy shuts down all displays and switches
off the received signal except for the currently used TCU.
Privacy Enabled:
Only the TCU in use shows the current status in the display. All other TCU’s shows only the time
of day and the "Busy" annunciator, which is updated according to the Exclusive Access parameter.
The received signal is only led to the currently used TCU securing privacy. If the external speaker
is assigned to the currently used TCU, it can be switched on/off by pressing "Prog" "1" "Enter", else
it is switched off.
When the equipment is switched on only Time Of Day is displayed. Press any key (preferably the
"Enter" key) on a TCU and the last frequency set-up is shown. If the Exclusive Access parameter
is enabled, "Busy" is flashed in all other displays.
Privacy Disabled:
All displays shows the same information and are updated simultaneously, except for the "Busy"
annunciators which are updated according to the Exclusive Access parameter. The received signal
is led to all TCU’s, and all internal speakers may locally be switched on/off. The external speaker
may be switched on/off according to it’s configuration. See description below.
MASTER PRIORITY
If it is desirable to have one TCU with higher priority than the rest, Master Priority (1st Priority)
should be enabled. When Master Priority is enabled the TCU with Priority/Intercom number equal
to "1" gets the Master Priority.
From the TCU with Master Priority, it is always possible to break in and take over the control of the
transceiver just by pressing any key (preferably the "Enter" key) on the TCU. Having taken over,
no other TCU can interrupt the Master TCU.
Master Priority Disabled:
All TCU’s have equal priority and the system set-up is determined by the Exclusive Access and
Privacy parameters alone.
Master Priority Enabled:
The TCU with Priority/Intercom number = "1" is given Master Priority. The Master TCU can at all
time break in and take over control of the transceiver. All other TCU’s are updated according to the
Privacy parameter, and "Busy" is flashed.
When the Master TCU has taken over no other TCU can interrupt the Master.
When control from the Master is finished press "Prog" "0" "Enter" (Leave System To Other User).
Displays are updated according to the Privacy parameter and "Busy" is switched off in all TCU’s.
INSTALLATION CONFIGURATION
3-66 TRP9250 TECHNICAL MANUAL