Skanti TRP 9250, Technical Manual, Page: 248 / 289

PROGRAMMING: POSITION
>PROGRAMMING< >POSITION<
Automatic updating
If automatic updating from the NMEA input is used the actual position is displayed, will
return to the STATUS display
If not automatically updated, the DSC 9000 should be regularly updated manually in order to be
able to receive Area calls correctly.
Manual updating
Select >EDIT< .
Press .
Enter the latitude.
Press
Select S or N using an arrow key.
Press
Enter the longtitude.
Press
Select E or W using an arrow key.
Press
PROGRAMMING Position
55 ˚ 59 ’ N 133˚ 20’ W at 1229 UTC
OK > EDIT<
PROGRAMMING Position
(55 ˚ 59 ’) ˚ ’ at UTC
------------------ Enter latitude --------------------
PROGRAMMING Position
55 ˚ 59 ’ <N> ˚ ’ at UTC
-- Change by [<] [>] or press [Enter] --
PROGRAMMING Position
55 ˚ 59 ’ N (133˚ 20’) at UTC
---------------- Enter longtitude ------------------
PROGRAMMING Position
55 ˚ 59 ’ N 133˚ 20’ <W> at UTC
-- Change by [<] [>] or press [Enter] --
DSC OPERATION PROGRAMMING: POSITION
6-56 TRP 9250 TECHNICAL MANUAL