Skanti TRP 9250, Technical Manual, Page: 261 / 289

TEST: SELF-TEST
>TEST< >SELF-TEST<
The test starts immediately and will continue
until all test are completed and found ok.
Press to end the test and return
to status display.
If a test fails the self-test will stop and
display:
test step no.
name of the failing test
error code
Press to continue.
If any the self test will stop on the next failure.
Press to continue.
When all test are completed a test status
is displayed.
Press to end the test and return
to status display.
The error code consists of step number (2 digits), indication of previous faults (1 digit: 0=no, 1=yes)
and failure type (1 digit).
If an additional DU is connected a selftest on that is included in the sequence. The display will indicate
that DU 2 is tested.
TEST Automatic Self-test
Completed 19 steps ok
0 bypassed
0 failed >END<
TEST Automatic Self-test
03 Synthesizer test: Failed
Error code: 0301 >CONTINUE< END
TEST Automatic Self-test
04 Synthesizer test: Failed
Error code: 0411 >CONTINUE< END
TEST Automatic Self-test
Completed 19 steps ok
0 bypassed
2 failed >END<
TEST: SELF-TEST DSC OPERATION
TRP 9250 TECHNICAL MANUAL 6-69