Skanti TRP 9250, Technical Manual, Page: 167 / 289

SERVICE RELATED ’PROG’ KEY OPERATIONS
By using the ’Prog’ key extra functions and features may be selected, and programming of the
equipment is possible.
’Prog’ operations are selected by pressing:
Some functions requires further key entries where as others requires storing of parameters with
the ’STO’ key or stepping forward with the ’Volume Up’ key.
The following is a list of the Functions which are selected by their number:
0 - 9 : Select modes and features. Refer to OPERATION section.
10 - 19 : Select special functions. Refer to OPERATION section.
20 - 74 : Service or installation.
98 : Security Code. Refer to OPERATION section.
99 : Select Configuration Mode. Refer to INSTALLATION section.
No. Function
0 : Leave System to other User.
1: Connect TCU Remote Control port
2 : Select LSB Mode.
3 : Select R3E Mode.
4: Set Side Tone frequency for CW.
5: Set Break-in Time for CW.
6 : Switch RF Attenuator On/Off.
7 : Float Antenna.
8 : Ground Antenna.
9 : Switch "Boop" Sound On/Off.
10: Select Intercom.
11: Set Real Time Clock.
12: Switch Treble Cut On/Off
13: Tilt Viewing Angle of Display.
14: Toggle Bar-graph Reading, Power or Amperes.
15: Set Beep Level.
0-99
SERVICE RELATED ’PROG’ KEY OPERATIONS SERVICE
TRP 9250 TECHNICAL MANUAL 5-17