Skanti TRP 9250, Technical Manual, Page: 48 / 289

5. Press or to adjust the
sensitivity level.
e.g. sensitivity -80 dB
Press to store the level.
6. Enter the Dwell Time which is the period in which the
receiver will "listen" for a signal on each frequency.
e.g. 2.5 seconds.
Press to store the Dwell Time.
7. Enter the Hold Time which is the period in which the
receiver will stay on a frequency if the Trigger Source
has detected a signal.
e.g. 20 seconds.
Press to store the Hold Time.
Now the channels that you wish to scan must be stored in the Scan Table.
8. Enter the first Channel Number to be scanned.
e.g. ITU ch. 403
Press to store the channel.
CHANNEL SCANNING, SET UP OPERATION
TRP 9250 TECHNICAL MANUAL 2-33