Skanti TRP 9250, Technical Manual, Page: 47 / 289

CHANNEL SCANNING, SET UP
Setting up a Channel Scanning program
1. Press to start the programming.
The currently selected Scan Program Number is
displayed. e.g. 0.
2. Enter the Scan Program Number that you wish to
programme.
e.g. 1.
Press to select the Program Number.
Start programming.
3. Enter the Number Of Channels that you wish to scan.
e.g. 3.
Press to store the Number Of Channels.
4. Enter the number of the Trigger Source that you want
to use : 0 = no trigger source, 1 = squelch,
2 = signal strength, 3 = squelch or signal strength,
4 = squelch and signal strength.
e.g. 2.
Press to store the Trigger Source.
Because signal strength is selected as Trigger Source
in this example, you must set the corresponding sensitivity
level now.
OPERATION CHANNEL SCANNING, SET UP
2-32 TRP 9250 TECHNICAL MANUAL