Skanti TRP 9250, Technical Manual, Page: 225 / 289

SENDING A DIRECT-DIAL CALL Cont’d
5. Select SEND
Press .
6. Press
When acknowledgement is received and the
coast station can comply immediately the call
is automatically repeated on the working
frequency contained in the acknowledment.
Lift the handset off hook and wait for the
called subscriber to answer the telephone
When the call is completed or in case of
no answer, place the handset on-hook.
An ’End of call’ DSC message is then sent
to the coast station to stop call timing.
---- Awaiting ack on 1813.0 kHz ----
----------- Transmitting -----------
--------- Tuning transmitter ---------
---- Awaiting ack on 1624.5 kHz ----
----------- Transmitting -----------
----- Checking for free channel -----
---- Awaiting ack on 1813.0 kHz ----
----------- Transmitting -----------
----- Tuning transmitter -----
TX-CALL Direct-dial to: 002192000
Tel: 42482544
DSC tx: 2159.5 kHz EDIT SAVE > SEND<
TX-CALL Direct-dial to: 002192000
Tel: 42482544
-- Press [Call] to send on 2159.5 kHz --
TX-CALL Direct-dial to: 002192000
Tel: 42482544
Working freq. Tx: 2076.0 Rx: 1813.0 kHz
----- Setting-up transceiver -----
RX-ACKNOWLEDGEMENT from: 002192000
Tel: 42482544 USB telephony
Working freq. Tx: 2076.0 Rx: 1813.0 kHz
Received on 1813.0 kHz
>END<
TX-CALL Direct-dial to: 002192000
Tel: 42482544
End of call
--------- Tuning transmitter ---------
SENDING A DIRECT-DIAL CALL Cont’d DSC OPERATION
TRP 9250 TECHNICAL MANUAL 6-33