Skanti TRP 9250, Technical Manual, Page: 36 / 289

TRANSMITTER FREQUENCY
Selecting a transmitter frequency
1. Press to clear the transmitter display
2. Enter the transmitter frequency that you wish to use.
e.g. 4125 kHz.
3. Press to complete your frequency
choise.
Transmitter frequency range: Dependent of Transceiver version (See below).
The transmitter display will flash if an invalid frequency is entered. Pressing Enter will return to
the previous selected TX frequency.
Transceiver Unit 9250: TX frequencies pre-programmed in the Configuration Prom. The
corresponding mode will automatically be selected
Transceiver Unit 9251: TX frequencies in the Marine Bands ( 1.60 - 4.80 MHz, 6.20 - 8.95
MHz, 12.23 - 17.65 MHz, 18.78 - 27.10 MHz ).
Transceiver Unit 9253, 9254, 9255, 9257: TX frequencies from 1.6 MHz to 30 MHz.
TRANSMITTER FREQUENCY OPERATION
TRP 9250 TECHNICAL MANUAL 2-21