SIGNAMAX a.s.
Office: Vlarska 22, 627 00 Brno, CZ
T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu
23
system
Configure system information.
time-server
Synchronize the time of a computer client or server to another server.
upgrade
Allow users to update firmware and restore configuration via FTP or TFTP.
user
Set up a user account and its access privilege.
write
Save your configurations to Flash.
txtcfg
Save your configurations to Flash and show current operating configurations.
Show
Show a list of commands or show the current setting of each listed command.
2.5.1 Backup command mode
SWH# backup
SWH(backup)#
Command
Purpose & Description
Usage
=================== ===========================
=============================
auto-backup Set Auto Backup auto-backup
config Set Configuration config
exit Exit from current mode exit
show Show Backup Settings show
SWH(backup)#
Prompt
Command & Parameter
Description
auto-backup <ftp | tftp><server
ip> <username> <password>
<file directory> <0-23 o'clock>
To configure auto-backup settings. The
system will automatically backup a
configuration file.
<ftp | tftp>: Choose FTP or TFTP to backup a
configuration file automatically.
<server ip>: Enter the IP address of the FTP
or TFTP server.
<username>: Enter the username when you
backup a file via FTP server. If you use TFTP
server to backup a file, you do not need to
specify username.
<password>: Enter the password when you
backup a file via FTP server. If you use TFTP
server to backup a file, you do not need to
specify password.
<file directory>: Enter the file location within
the FTP or TFTP server.
<0-23 o’clock>: Enter the time that you would
like the server to backup a configuration file
automatically.
SWH(backup)#
auto-backup <enable | disable>
To enable or disable auto-backup function.