SIGNAMAX a.s.
Office: Vlarska 22, 627 00 Brno, CZ
T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu
68
frame-type <port_list> <all |
tagged>
To enable or disable the frame type. Two
frame types are available, these are “All” or
“Tagged”. The default setting is “All” to all
ports. “Tagged” means that the port will only
send and receive VLAN-tagged packets.
When ports are set to “All”, they will send
and receive both VLAN-tagged and
untagged packets.
<port_list>: Specify a port number or
multiple port numbers with the format 5, 7,
8, 9, 12 or 5, 7-9, 12
For example:
SWH(config-vlan)# frame-type 1-4,10-
15,18,19 tagged
mgt-vlan <port_list> <aware>
<cpu_vid>
To configure a management VLAN.
<port_list>: Specify a port number or
multiple port numbers as the management
ports with the format 5, 7, 8, 9, 12 or
5, 7-9, 12
<aware>: Enable or disable VLAN-aware
function.
<cpu_vid>: Specify an existing VID.
For example:
SWH(config-vlan)# mgt-vlan 1-4, 10-15, 18,
19 enable 4090
pvid <port_list> <pvid>
The range of PVID is between 1 and 4094.
VLAN ID will be assigned to untagged
frames received on the interface. The
default setting is 1.
<port_list>: Specify a port number or
multiple port numbers with the format 5, 7,
8, 9, 12 or 5, 7-9, 12
<pvid>:1~4094
For example:
SWH(config-vlan)# pvid 1-4,10-15,18,19 1
egress <port_list> <normal |
untag>
Specify normal or untag to egress traffic.
<port_list>: Specify a port number or
multiple port numbers with the format 5, 7,
8, 9, 12 or 5, 7-9, 12
<normal | untag>: The default setting to all
ports is “Normal”.
For example:
SWH(config-vlan)# egress 1-4,10-15,18,19
untag
2.6.17 LLDP command mode
SWH(config)# lldp
SWH(config-lldp)#
Command
Purpose & Description
Usage
=================== ===========================
=============================
