SIGNAMAX a.s.
Office: Vlarska 22, 627 00 Brno, CZ
T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu
151
TCP Parameters
Source Port Filter: Select “Any” to filter frames from any source ports. If “Specific” is
selected, you need to further specify a source port number. If “Range” is selected,
you need to further specify a source port range.
Source Port NO.: Specify a source port number (0~65535).
Source Port Range: Specify a source port range (The source port number is from 0
to 65535).
Destination Port Filter: Select “Any” to filter frames to nay destination ports. If
“Specific” is selected, you need to further specify a destination port number. If
“Range” is selected, you need to further specify a destination port range.
Destination Port NO.: Specify a destination port number (0~65535).
Destination Port Range: Specify a destination port range (The source port number
is from 0 to 65535).
TCP FIN: Select “0” to indicate that the FIN value in TCP header is zero; “1” to
indicate the FIN value in TCP header is one. Select “any” to indicate either 1 or 0.
TCP SYN: Select “0” to indicate that the SYN value in TCP header is zero; “1” to
indicate the SYN value in TCP header is one. Select “any” to indicate either 1 or 0.
TCP RST: Select “0” to indicate that the RST value in TCP header is zero; “1” to
indicate the RST value in TCP header is one. Select “any” to indicate either 1 or 0.
TCP PSH: Select “0” to indicate that the PSH value in TCP header is zero; “1” to
indicate the PSH value in TCP header is one. Select “any” to indicate either 1 or 0.
TCP ACK: Select “0” to indicate that the ACK value in TCP header is zero; “1” to
indicate the ACK value in TCP header is one. Select “any” to indicate either 1 or 0.
TCP URG: Select “0” to indicate that the URG value in TCP header is zero; “1” to
indicate the URG value in TCP header is one. Select “any” to indicate either 1 or 0.
