SignaMax 500-7622GE2GS, User Manual

Page: 38 / 184

SIGNAMAX a.s.
Office: Vlarska 22, 627 00 Brno, CZ
T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu
37
Command Description
acl Set up access control entries and lists.
aggr Configure LACP functions.
cfm Configure the Managed Switch OAM 802.1ag CFM settings.
dot1x Configure the Managed Switch to send information when 802.1x client
authenticates via the Switch.
exit
Exit the Config mode.
help
Display a list of available commands in Config mode.
history
Show commands that have been used.
igmpfilter
Configure IGMP filtering settings.
igmp
Configure IGMP settings.
mac
Set up each port’s MAC learning function.
mirror
Set up target port for mirroring.
mvr
Configure Multicast VLAN Registration (MVR) settings.
port
Configure the status of each port.
qos
Set up the priority of packets within the Managed Switch.
remarking
Set up queue and DSCP mappings.
rstp
Set up each port and aggregated ports’ RSTP status.
ska
Configure Secure Customer Connections (SKA) settings.
multicast
Configure static multicast settings.
switch
Set up acceptable frame size and address learning, etc.
vlan
Set up VLAN mode and VLAN configuration.
lldp
Set up LLDP (Link Layer Discovery Protocol) configurations.
show
Show a list of commands or show the current setting of each listed command.
2.6.1 ACL command mode
SWH(config)# acl
SWH(config-acl)#
Command Purpose & Description Usage
=================== =========================== =============================
<id> Edit ACL ID <id>
action Set Action action <port_list> <type>
policy Set Policy policy <port_list> <polity>
port-copy Set Port Copy port <port_list> <type>
rate-lim Set Rate Limit rate-lim <port_list> <type>
rate-lim-id Set Rate Limit ID rate-lim-id <id> <rate>
shutdown Set Shutdown shutdown <port_list> <type>
add Add ACL add <id> <type>
delete Delete ACL del <id>
exit Exit from current mode exit
show Show ACL settings show
Prompt Command & Parameter Description
SWH(config-acl)# action <port_list> <permit | deny>
To permit or deny traffic of the specified port
numbers.
<port_list>: Specify a port number or multiple
port numbers with the format 5, 7, 8, 9, 12 or
5, 7-9, 12
<permit | deny>: To permit or deny the
action.
For example:
SWH(config-acl)# action 1-4, 10-15, 18, 19
permit