SIGNAMAX a.s.
Office: Vlarska 22, 627 00 Brno, CZ
T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu
86
14. SKA Configuration: Set up DHCP option 82 agent relay, port setting, filtering and
static IP table configuration.
15. Access Control List Management: Set up access control entries and lists.
16. LLDP Configuration: Enable or disable LLDP on ports and set up LLDP-related
attributes
4.4.1 Switch Configuration
Click the option Switch Configuration from the Switch Management menu and then the
following screen page appears.
Maximum Frame Size: Specify the maximum frame size between 1518 and 9600 bytes.
The default maximum frame size is 9600bytes.
MAC Address Aging Time: Specify MAC Address aging time between 0 and 1048575
seconds.
SFP Safety Temperature: Enter the specific temperature for the Managed Switch to detect
the SFP DMI safety range. (Default 0~70C)
SFP Safety Voltage: Enter the specific Voltage for the Managed Switch to detect the SFP
DMI safety range. (Default 3~3.6V)
SFP Safety TX Bias: Enter the specific Bias for the Managed Switch to detect the SFP DMI
safety range. (Default 400mA)
Layer 2 Control Protocol
0180C200000X: Select either “Not Filter” or “Filter”. When “Filter” is selected, packets from
the address ranging from 0180C2000000 to 0180C200000F will be dropped. Multicast MAC
addresses from 0180C2000000 to 0180C200000F are reserved for use by 802.1/802.3
protocols. The purpose for each multicast address is described briefly below:
