SIGNAMAX a.s.
Office: Vlarska 22, 627 00 Brno, CZ
T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu
26
port <telnet_port>
When telnet is enabled, you can set up the port
number that allows telnet access.
The default port number is set to 23 in telnet
mode. However, you can also identify a port
number between 1025 and 65535.
For example:
SWH(service-telnet)# port 23
SWH(service-snmp)#
mode <enable | disable>
In service command mode, it provides three
modes for users to choose from, these are
“telnet”, “snmp” and “web”. If you type “snmp”,
you can set up either to enable or disable this
mode.
For example:
SWH(service-snmp)# mode enable
add<community>
Add a new community. The name of the
community is up to 20 alphanumeric characters.
For example:
SWH(snmp-community)# add myswitch
SWH (snmp-
community)#
delete<community>
To delete a community that is already added to
the Managed switch.
For example:
SWH(snmp-community)# delete myswitch
state <enable | disable>
To enable or disable community function.
description <description>
Enter a unique description for this community
name, up to 35 alphanumeric characters. This is
mainly for reference only.
ip <enable | disable>
To enable or disable IP security. If enabled,
Community may access the Managed Switch
only through the management station, which has
the exact IP address specified in IP address field
below. If disabled, Community can access the
Managed Switch through any management
stations.
SWH(snmp-
community_
commnit
y name
)#
ip_addr <ip_addr>
Specify the IP address used for IP Security
function.
