SIGNAMAX a.s.
Office: Vlarska 22, 627 00 Brno, CZ
T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu
33
2.5.9 User command mode
SWH# user
SWH(user)#
Command
Purpose & Description
Usage
=================== ===========================
=============================
<name> Edit User <name>
add Add User add <name> [pass] <level>
delete Delete User del <username>
radius RADIUS Config radius
exit Exit from current mode exit
show Show User Settings show
SWH(user)#
Prompt
Command & Parameter
Description
add <username>
[password]
<administrator |
read_and_write | read_only
| access_denied>
Add a new user and specify its access
privilege.
<username>: Specify the new username.
[password]: Specify this username’s
password (optional).
<administrator | read_and_write |
read_only | access_denied>: Four
operation privileges are available in the
Managed Switch.
Administrator: Full access right includes
maintaining user account & system
information, loading factory settings, etc.
Read & Write: Full access right but cannot
modify user account & system information
and load factory settings.
Read Only: Allow to view only.
Access Denied: Completely forbidden for
access.
For example:
SWH(user)# add user1 user1 administrator
delete <username>
Delete a registered user.
For example:
SWH(user)# delete user1
exit
Quit the current mode and return to Enable
Mode.
SWH(user)#
show
Show user settings.
state <enable | disable>
To enable or disable this new login user
account.
For example:
SWH(user_username)# state enable
SWH (user_
username
)#
password<password>
Set up a password for this user account.
<password>: Enter the password for this
user account of up to 20 alphanumerical
characters.
