SIGNAMAX a.s.
Office: Vlarska 22, 627 00 Brno, CZ
T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu
81
Time Synchronization: To enable or disable time synchronization.
Time Server Address: NTP time server address.
2nd Time Server Address: When the default time server is down, the Managed Switch will
automatically connect to the 2nd time server.
Synchronization Interval: The time interval to synchronize from NTP time server.
Time Zone: Select the appropriate time zone from the pull-down menu.
Daylight Saving Time: To enable or disable the daylight saving time function. It is a way of
getting more daytime hour(s) by setting the time to be hour(s) ahead in the morning.
Daylight Saving Time Offset: Click the pull-down menu to select the time offset of daylight
saving time.
NOTE: SNTP is used to get the time from those NTP servers. It is recommended that the
time server is in the same LAN with the Managed Switch or at least not too far away. In
this way, the time will be more accurate.
4.3.5 Device Community
Click the option Device Community from the Network Management menu and then the
following screen page appears.
Up to 10 Device Communities can be set up.
Click New to add a new community and then the following screen page appears.
Click Edit to view the current community settings.
Click Delete to remove a registered community.
