SIGNAMAX a.s.
Office: Vlarska 22, 627 00 Brno, CZ
T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu
148
Sender IP Filter: Select “Any”, “Host”, or “Network” for sender IP filter. If “Host” is
selected, you need to indicate a specific host IP address. If “Network” is selected, you
need to indicate both network address and subnet mask.
Sender IP Address: Specify a sender IP address.
Sender IP Mask: Specify a subnet mask.
Target IP Filter: Select “Any”, “Host”, or “Network” for target IP filter. If “Host” is
selected, you need to indicate a specific host IP address. If “Network” is selected, you
need to indicate both network address and subnet mask.
Target IP Address: Specify a target IP address.
Target IP Mask: Specify a subnet mask.
ARP SMAC Match: Select “0” to indicate that the SHA (Sender Hardware Address)
field in the ARP/RARP frame is not equal to source MAC address. Select “1” to
indicate that SHA field in the ARP/RARP frame is equal to source MAC address.
Select “Any” to indicate a match and not a match.
RARP DMAC Match: Select “0” to indicate that the THA (Target Hardware Address)
field in the ARP/RARP frame is not equal to source MAC address. Select “1” to
indicate that THA field in the ARP/RARP frame is equal to source MAC address.
Select “Any” to indicate a match and not a match.
IP/Ethernet Length: Select “0” to indicate that HLN (Hardware Address Length) field
in the ARP/RARP frame is not equal to Ethernet (0x6) and the Protocol Address
Length field is not equal to IPv4 (0x4). Select “1” to indicate that HLN (Hardware
Address Length) field in the ARP/RARP frame is equal to Ethernet (0x6) and the
Protocol Address Length field is equal to IPv4 (0x4). Select “Any” to indicate a match
and not a match.
IP: Select “0” to indicate that Protocol Address Space field in ARP/RARP frame is not
equal to IP (0x800). Select “1” to indicate that Protocol Address Space is equal to IP
(0x800). Select “Any” to indicate a match and not a match.
Ethernet: Select “0” to indicate that Hardware Address Space field in ARP/RARP
frame is not equal to Ethernet (1). Select “1” to indicate that Hardware Address Space
field is equal to Ethernet (1). Select “Any” to indicate a match and not a match.
