Siemens SINUMERIK 808D Programming And Operating Manual Download

Page: 29 / 270

Programming and Operating Manual (Milling)

6FC5398-4DP10-0BA1, 01/2014

3.2.8

Entering/modifying the tool wear data

Note
You must distinguish the direction of tool wear compensation clearly.

Operating sequence

Select the desired operating area.

Open the tool wear window.

Use the cursor keys to select the required tools and their edges.

Enter the tool length wear parameter and the tool radius wear parameter.

Positive value: The tool moves away from the workpiece.

Negative value: The tool moves closer to the workpiece

Press this key or move the cursor to activate the compensation.

Summary of Contents for SINUMERIK 808D















































































































































































































































































Search results

Summary of Contents for SINUMERIK 808D

Reviews:

Related manuals for SINUMERIK 808D

Brands by name

Popular brands

Siemens SINUMERIK 808D, Programming And Operating Manual

Search results

Summary of Contents for SINUMERIK 808D

Reviews:

Related manuals for SINUMERIK 808D

Brands by name

Popular brands