Siemens SINUMERIK 808D Programming And Operating Manual Download

Page: 150 / 270

Programming and Operating Manual (Milling)

150

6FC5398-4DP10-0BA1, 01/2014

9.4.11

Drilling with stop 2 - CYCLE88

Programming
CYCLE88 (RTP, RFP, SDIS, DP, DPR, DTB, SDIR)

Parameters

Parameter

Data type

Description

RTP

REAL

Retraction plane (absolute)

RFP

REAL

Reference plane (absolute)

SDIS

REAL

Safety clearance (enter without sign)

REAL

Final drilling depth (absolute)

DPR

REAL

Final drilling depth relative to the reference plane (enter without sign)

DTB

REAL

Dwell time at final drilling depth (chip breakage)

SDIR

INT

Direction of rotation
Values: 3 (for M3), 4 (for M4)

Function
The tool drills at the programmed spindle speed and feedrate to the entered final drilling depth. When drilling with stop, a

spindle stop without orientation M5 and a programmed stop M0 are generated when the final drilling depth is reached.

Pressing the following key traverses the outward movement at rapid traverse until the retraction plane is reached:

Sequence
Position reached prior to cycle start:
The drilling position is the position in the two axes of the selected plane.
The cycle creates the following sequence of motions:

●

Approach of the reference plane brought forward by the safety clearance by using G0

●

Traversing to final drilling depth with G1 and the feedrate programmed prior to the cycle call

●

Dwell time at final drilling depth

●

Spindle and program stop with M5 M0. After program stop, press the following key:

●

Retraction to the retraction plane with G0

Summary of Contents for SINUMERIK 808D















































































































































































































































































Search results

Summary of Contents for SINUMERIK 808D

Reviews:

Related manuals for SINUMERIK 808D

Brands by name

Popular brands

Siemens SINUMERIK 808D, Programming And Operating Manual

Search results

Summary of Contents for SINUMERIK 808D

Reviews:

Related manuals for SINUMERIK 808D

Brands by name

Popular brands