Programming and Operating Manual (Milling)
140
6FC5398-4DP10-0BA1, 01/2014
Function
The tool drills at the programmed spindle speed and feedrate to the entered final thread depth.
This cycle is used to program tapping with the compensating chuck:
●
Without encoder
●
With encoder.
Sequence
Tapping with compensating chuck without encoder
Position reached prior to cycle start:
The drilling position is the position in the two axes of the selected plane.
The cycle creates the following sequence of motions:
●
Approach of the reference plane brought forward by the safety clearance by using G0
●
Tapping to the final drilling depth
●
Dwell time at tapping depth (parameter DTB)
●
Retraction to the reference plane brought forward by the safety clearance
●
Retraction to the retraction plane with G0
Sequence of operations
Tapping with compensating chuck with encoder
Position reached prior to cycle start:
The drilling position is the position in the two axes of the selected plane.
