Siemens SINUMERIK 808D Programming And Operating Manual Download

Page: 232 / 270

Programming and Operating Manual (Milling)

232

6FC5398-4DP10-0BA1, 01/2014

A.10

Operation wizard

The operation wizard provides step-by-step guides on basic commissioning and operation procedures.

Operating sequence

Press this key on the PPU to call the operation wizard.

Select a step of the machining operation with cursor keys.

Press this softkey to start the onboard assistant.

Press this softkey to enter the next page.

Press this softkey to enter the previous page.

Press either key to return to the main screen of the operation wizard.

Press one of the following five operating area keys to exit the main screen of the operation wizard.

A.11

Editing Chinese characters

The program editor and PLC alarm text editor both allow you to edit the simplified Chinese characters on the Chinese variant

of the HMI.

Editing simplified Chinese characters

Press the

key and

key to switch the editor on or off.

Press this key to toggle between different input methods.

Press the numeric keys (1 to 9) on the PPU to select the desired characters.

Summary of Contents for SINUMERIK 808D















































































































































































































































































Search results

Summary of Contents for SINUMERIK 808D

Reviews:

Related manuals for SINUMERIK 808D

Brands by name

Popular brands

Siemens SINUMERIK 808D, Programming And Operating Manual

Search results

Summary of Contents for SINUMERIK 808D

Reviews:

Related manuals for SINUMERIK 808D

Brands by name

Popular brands