Backing up data and series commissioning
7.2 Backup the settings to a PC
Converter with the control units CU240D-2
250
Operating Instructions, 04/2018, FW V4.9 SP10, A5E34262100B AF
7.2
Backup the settings to a PC
With the supply voltage switched on,
you can transfer the converter settings
from the converter to a PG/PC, or the
data from a PG/PC to the converter.
The precondition is that you have a
commissioning tool on your PG/PC.
Commissioning tools (Page 81)
Inverter
→
PC/PG
Procedure with Startdrive
1.
Go online.
2.
Select "Online" > "Upload device to PG/PC."
3.
Back up the project with "Project" > "Save."
4.
Wait until Startdrive reports that data backup has been completed.
5.
Go offline.
You have backed up the settings with Startdrive.
❒
PC/PG
→
inverter
The procedure depends on whether you also transfer settings of safety functions or not.
Procedure with Startdrive without enabled safety functions
1.
Go online.
2.
Select "Load to device" > "Hardware and software" from the shortcut menu.
3.
Wait until Startdrive reports that loading has been completed.
4.
Go offline.
5.
Confirm the dialog box that then opens by clicking "Yes" to save the data to the non-
volatile memory of the inverter (Copy from RAM to ROM).
You have transferred the settings from the PG to the inverter with Startdrive.
❒
