Siemens Sinamics CU240D-2 DP, Operating Instructions Manual

Page: 148 / 356

Advanced commissioning
6.10 Selecting physical units
Converter with the control units CU240D-2
146
Operating Instructions, 04/2018, FW V4.9 SP10, A5E34262100B AF
6.9.2 Further information
Application description for the free function blocks
Further information is provided on the Internet:
FAQ ( http://support.automation.siemens.com/WW/view/en/85168215 )
6.10 Selecting physical units
6.10.1 Motor standard
Selection options and parameters involved
The inverter represents the motor data corresponding to motor standard IEC or NEMA in
different system units: SI units or US units.
Table 6- 15 Parameters involved when selecting the motor standard
Parame-
ter
Designation Motor standard IEC/NEMA, p0100 =
0
1)
IEC motor
50 Hz, SI units
1
NEMA motor
60 Hz, US units
2
NEMA motor
60 Hz, SI units
r0206 Power Module rated power kW hp kW
p0219 Braking resistor braking power kW hp kW
p0307 Rated motor power kW hp kW
p0316 Motor torque constant Nm/A lbf ft/A Nm/A
r0333 Rated motor torque Nm lbf ft Nm
p0341 Motor moment of inertia kgm
2
lb ft
2
kgm
2
p0344 Motor weight kg Lb kg
r0394 Rated motor power kW hp kW
r1493 Total moment of inertia, scaled kgm
2
lb ft
2
kgm
2
1)
Factory setting
It is only possible to change the motor standard during quick commissioning.
6.10.2 System of units
Some physical units depend on the system of units selected (SI or US), for example the
power [kW or hp] or the torque [Nm or lbf ft]. You can select in which system of units the
converter represents its physical values.