Siemens SIMATIC PCS 7 SMART Page 62 Getting Started Download

Page: 62 / 210

6.2

Working with libraries

6.2.1

CFC Charts and the master data library

Introduction to the master data library

When creating CFC charts, you will be working with the master data library. Do not copy any

blocks and process tag types directly from the PCS 7 AP library to the CFC charts of your

project. Instead, create the blocks and process tags as required in the master data library and

copy these objects from this library to the CFC charts.

Advantages of the master data library

The advantages of using the master data library is:
● Ensures that the the same version of a block is used in a project without any confusion.

This is important if there is more than one project engineer working on a project with a

multiproject.

● Provides you with the convenience of hiding libraries. This function allows you to hide all

libraries except for the master data library, in order to prevent inconsistency and errors

within the project.

● They are archived automatically when you archive the multiproject.

6.2.2

Storing objects in the master data library

Changes to blocks

You can change the properties of the block in the master data library. For example, you can

adapt messages specifically to your project requirements. Each block instance that is created

when you insert a block in a CFC automatically has the modified properties.
This means that you only have to modify the block once in the master data library and not

repeatedly for each individual block instance.
Modifications to blocks intended for a specific CFC are made directly in the CFC block instance.

For example, parameters for inputs and outputs, such as setpoints and limit values.

Master data library and process tag types

You can also store the process tag types provided by PCS 7 SMART in your master data

library. All the blocks included in this process tag type are automatically entered in the block

folder of your master data library at the background.

Creating CFCs
6.2 Working with libraries

PCS 7 SMART Getting Started - Part 1 (V9.0 with APL)

Getting Started, 12/2017, A5E42181435-AA

Summary of Contents for SIMATIC PCS 7 SMART



















































































































































































































Search results

Summary of Contents for SIMATIC PCS 7 SMART

Reviews:

Related manuals for SIMATIC PCS 7 SMART

Brands by name

Popular brands

Siemens SIMATIC PCS 7 SMART, Getting Started

Search results

Summary of Contents for SIMATIC PCS 7 SMART

Reviews:

Related manuals for SIMATIC PCS 7 SMART

Brands by name

Popular brands