Siemens SIMATIC PCS 7 SMART Getting Started Download Page 189

Page: 189 / 210

11.4

Compile and download the changes

Prerequisites

● The color_gs project is open in SIMATIC Manager.
● The Plant View is activated.
● The CPU is in "RUN" mode.

Procedure

1. Select the "color_gs_prj_Prj" object in the tree view.
2. Select PLC > Compile and Download Objects..

The "Charts" object status is "changed".

3. Activate the check boxes as follows:

Note
If you see "undefined" for all objects in the "Compile and Download Objects" dialog box

status, click "Status" in the "Update" area.

This updates the status.

4. Select the "Charts" object and click "Edit".

The "Compile Program/Download to Target System" dialog box opens.

Performing the additional task

11.4 Compile and download the changes

PCS 7 SMART Getting Started - Part 1 (V9.0 with APL)

Getting Started, 12/2017, A5E42181435-AA

189

Summary of Contents for SIMATIC PCS 7 SMART



















































































































































































































Search results

Summary of Contents for SIMATIC PCS 7 SMART

Reviews:

Related manuals for SIMATIC PCS 7 SMART

Brands by name

Popular brands

Siemens SIMATIC PCS 7 SMART, Getting Started

Search results

Summary of Contents for SIMATIC PCS 7 SMART

Reviews:

Related manuals for SIMATIC PCS 7 SMART

Brands by name

Popular brands