Siemens RUGGEDCOM WiN5100, User Manual, Page: 73 / 114

RUGGEDCOM WiN5100/WiN5200
User Guide
Chapter 6
CPE Management Interface
SNMPv3 Configuration 65
Figure 56: SNMPv3 Configuration pane
2. The Current SNMPv3 Status field displays the current status for the SNMPv3 system: Enabled or Disabled.
3. Review and set the SNMPv3 users in the Users table .
To add an SNMPv3 user, click the button. A new row appears in the Users Table . Enter the following
parameters:
Table: SNMPv3 Users Table
Field Description
Username The user name.
Authentication Passphrase The passphrase used for authentication.
Authentication Protocol Select the authentication protocol for the user.
Value: HMAC-SHA1
Privacy Passphrase The passphrase used for privacy.
Privacy Protocol Select the privacy protocol.
Value: CBC-DES
Access Group Associated the user with an SNMPv3 Access Group.
4. To remove an SNMPv3 user, select a row in the Users Table and click the button. If no rows are selected,
clicking the button removes the last entry in the table.
5. Click the Apply button.
6. To view the SNMPv3 access groups, click the
Access Groups
button. See Section 6.2.9.4, “Viewing
SNMPv3 Access Groups” .