Siemens RUGGEDCOM WiN5100 User Manual Download Page 3

Page: 3 / 114

RUGGEDCOM WiN5100/WiN5200

User Guide

Table of Contents

iii

Table of Contents

FCC Statement And Cautions ............................................................................

vii

Chapter 1

Introduction ..........................................................................................................

1.1  WiN5100 with External Antenna: Package Components and Unpacking ........................................... 1
1.2  WiN5200 with Integrated Antenna: Package Components and Unpacking ........................................  1
1.3  Safety Information ........................................................................................................................  2

1.4 Allowed Antenna Types ................................................................................................................ 3

Chapter 2

Product Description .............................................................................................

2.1  IEEE 802.16e Mobile WiMAX Compliance .....................................................................................  5
2.2  Block Diagram .............................................................................................................................  5
2.3  Features ......................................................................................................................................  7

2.3.1 Mobile WiMAX Wave 2 MIMO Features .............................................................................. 7

2.3.2 Deployment Models ........................................................................................................... 9

2.3.3 Service Flows .................................................................................................................. 10

2.3.3.1  Service Flow Classification ....................................................................................  10
2.3.3.2  Default Service Flows ...........................................................................................  11
2.3.3.3  Scheduling ...........................................................................................................  11

2.3.4 Physical Description ........................................................................................................ 12

Summary of Contents for RUGGEDCOM WiN5100



















































































































Search results

Summary of Contents for RUGGEDCOM WiN5100

Reviews:

Siemens RUGGEDCOM WiN5100, User Manual, Page: 3 / 114

Search results

Summary of Contents for RUGGEDCOM WiN5100

Reviews: