Siemens RUGGEDCOM WiN5100, User Manual, Page: 89 / 114

RUGGEDCOM WiN5100/WiN5200
User Guide
Chapter 6
CPE Management Interface
General Statistics 81
Figure 70: General Statistics pane
2. View the CPE general information in the following fields:
Table: General Statistics fields
Field Description
CPE Name Displays the name of the CPE. This name identifies the CPE on the base station and
in the base station management interface. The name is set on the System Functions
pane. For instructions on how to set the name, see Section 6.2.1, “Managing System
Functions” .
MS ID Displays the mobile station MAC address.
CPE Status Displays the current CPE status.
Values: Init | DL Synchronization | Handover DL acquisition | UL Acquisition | Ranging |
Handover ranging | Capabilities negotiation | Authorization | Registration | DHCP | TOD |
TFTP | Operational | Sleep | IDLE | Aborted
Up Time Displays the time since the last CPE start-up.
BS ID Displays the base station MAC address.
Frequency [kHz] Displays the CPE broadcast frequency, in kilohertz.
Bandwidth Displays CPE bandwidth setting.
Values: 3.5MHz | 5MHz | 7MHz | 10MHz
Current SW version Displays the current CPE software version number.
Current Authentication Displays the current CPE authentication mode.
Values: Null | EAP-TTLS | EAP-TLS
Outer NAI Displays the outer network access identifier.
Next re-authentication