Siemens RUGGEDCOM WiN5100, User Manual, Page: 78 / 114

Chapter 6
CPE Management Interface
RUGGEDCOM WiN5100/WiN5200
User Guide
70 Alarms & Traps
Table: Traps Table
Column Description
Trap ID Displays the trap identification number.
Trap Name Displays the trap name.
Activation Mode Indicates if the trap is enabled or disabled. To enable a trap, select True. To disable a
trap, select False.
Values: True | False
Severity Displays the severity of the trap condition.
Values: Clear | Critical | Major | Warning
Category Displays the category of the trap condition.
Values: Restart | Communication | RF | Hardware | Security | Environmental |
Redundancy | Services | Link Status
Description Displays a description of the trap condition.
Value Displays the value reported by the SNMP trap.
4. Click the Apply button.
For testing purposes, you can send selected traps on demand. To send traps, you must have SNMP Trap
Destinations configured. For instructions on configuring SNMP Trap Destinations, see Section 6.2.9, “SNMP
Administration” .
Procedure: Sending SNMP traps on demand
1. In the Traps Table , select one or more SNMP traps.
2. Click the Send Trap button.
SNMP Traps List
NOTE
The WIMAX-SS-TRAPS.mib file in the software release folder contains a full list of traps.
Table: SNMP Traps List
Event Name Description
RestartOK The subscriber station restarted successfully.
RestartFailure
The subscriber station failed to restart. This
event reports all causes of initialization errors.
WebLoginOK Web interface login was successful.
WebLogout Web interface logout.
WebLoginFailed Web login has failed for 10 consecutive attempts.
EthernetUp Ethernet link is up.
EthernetDown Ethernet link is down.
FileOperationsOK File operations are successful.
FileOperationsFail File operations failed.
ConfigChanged Configuration was changed successfully.